Generally, the precautions for safe boring, drilling,
counterboring and thread cutting apply. The following points, however, should
always be emphasized:
- All tools must be in good condition and used only
for the purpose for which they were made.
- All workpieces must be securely held in position for drilling,
boring or thread cutting. Excessive holding pressure may damage the work.
- Select tools of the right size for tightening or loosening
bolts, nuts and screws. Tools of the wrong size tend to damage the workpiece and
may slip off causing injuries.
- Make sure that large parts cannot drop to the ground when the
bolts and nuts or screws are removed.
- It is regarded as good craftsmanship to store all tools
properly and individual components always together with their
counterparts.
