Back to Home Page of CD3WD Project or Back to list of CD3WD Publications

		Grinding of Simple Tools - Course: Technique for manual working of materials. Methodical guide for instructors (Institut für Berufliche Entwicklung, 19 p.)
			(introduction...)
			1. Objectives and contents of practical vocational training in the working technique of ''Grinding of Simple Tools''
			2. Organizational preparations
			3. Recommendations for practical vocational training in the working technique of ''Grinding of Simple Tools''
			4. Application of the working technique of ''Grinding of Simple Tools''
			5. Caption and legends of the ''Grinding of Simple Tools'' transparencies series

1. Objectives and contents of practical vocational training in the working technique of ''Grinding of Simple Tools''

By concluding their training, the trainees shall have a good command of the working technique of "Grinding of Simple Tools".

Therefore, the following objectives have to be achieved:

Objectives

- Knowledge of purpose and application of the off-hand sharpening technique.
- Proper command of the working techniques and capability of off-hand sharpening of the most common tools.
- Capability of making decisions on the quality of their work independently.

The following contents have to be imparted to the trainees:

Contents:

- Purpose of sharpening
- Machines and tools for sharpening
- Action of grinding and whetting
- Applications of off-hand sharpening
- Hints for mounting and dressing of grinding wheels